Your presentation-development partner … demonstrate and inspire!

Tutorial for Circular Flows 011 and 012 – 1 Inflow

Using Circular Flows 011 and 012

Circular flows depict virtuous and vicious cycles. The horizontal lead-in flow and the last segment of the cycle are distinct and separate (unlike CF005 and CF006). CF011 has no wings and CF012 has wings. Other than that, there is no difference between the two series. The wings/no wings (wings are the arrow points that stick out beyond the shaft of the arrow) preference is dictated by what is being used throughout the document/presentation. You want to be sure you are building a consistent-looking message.

The center can be populated with the name of the cycle or a photograph. The segments can be numbered so a starting and stopping point can be established. Associated text can be placed outside the cycle framework next to each segment. Instead of using horizontal text for the segment descripters, you can use arc formats of WordArt.

Once you have identified the best-suited PowerFramework, download it to a specific location on your computer so you'll be able to find it (the desktop is always a good choice).

Customizing your PowerFrameworks Circular Flow

Adjust size

To resize this PowerFramework, you need to group it and scale it while resizing (hold the shift key down while you resize). This is important to do or the framework will become distorted.

Color variations

Select color from your document's color palette or a complimentary color so that the PowerFramework will reflect the color scheme of the rest of your document. Select "No line" if you want to eliminate the outline of the object, or change the line point size if you want thinner lines.

3D variation

3D effects are not recommended for circular flows unless the depth is very, very small. Otherwise, the circles turn into pipes. If you do use 3D, be sure the order of the pieces is correct so the 3D effect of the one piece does not block part of the other pieces. Also, when the pieces of a 3D framework are close together, the individual pieces become indistinct. You can you use variations of the same color to create more distinction between the segments. Be aware that using 3D darkens the colors of the object.


Shadows are tricky with this type of framework. Be very careful that you do not select a shadow effect that interferes with the primary pieces of the cycle. Adjust the layering of the pieces depending on which way the shadow is cast.

Gradients, patterns, and pictures

Gradients, patterns, and pictures can be added as fills from the "Fill Effects" menu. Gradients, when carefully used, can also add motion to the circular flow part of this type of framework. Remember not to make the gradient too radical from light to dark or the overlaid text will not be clearly readable.


Animations of circular flows can be wipes or fade in to show progression, basically anything that does not fly in from an unconnected origin. If you to animate with wipes, be sure to animate each piece individually, as the wipe needs to originate from different angles depending on which way the arrow segment is pointing.

Series that relate to this tutorial:

CF011 – Circular Flow 011 – 1 Inflow

Possible use example

CF012 – Circular Flow 012 – Inflow

Possible use example

Links to instructions for getting the framework into your presentation

  1. Determine the best file type for your needs
  2. Download the file
  3. Import the framework into your presentation
    1. Importing a PPT file
    2. Importing a EMF or PNG
Top Share